Zhao, L., Shen, L., He, Y., Hong, H. & Lin, H.
Influence of membrane surface roughness on interfacial interactions with sludge flocs in a submerged membrane bioreactor.
J. Colloid Interface Sci. 446, 84–90 (2015). DOI: 10.1016/j.jcis.2015.01.009
Nattich-Rak, M., Adamczyk, Z., Wasilewska, M. & Sadowska, M.
Revealing fibrinogen monolayer conformations at different pHs: Electrokinetic and colloid deposition studies.
J. Colloid Interface Sci. 449, 62–71 (2015). DOI: 10.1016/j.jcis.2014.10.001
Dickson, M. N., Liang, E. I., Rodriguez, L. a, Vollereaux, N. & Yee, A. F.
Nanopatterned polymer surfaces with bactericidal properties.
Biointerphases 10, 021010 (2015). DOI: 10.1116/1.4922157
Zanini, S. et al.
Development of antibacterial quaternary ammonium silane coatings on polyurethane catheters.
J. Colloid Interface Sci. 451, 78–84 (2015). DOI: 10.1016/j.jcis.2015.04.007
Surmeneva, M. A. et al.
Enhancement of the mechanical properties of AZ31 magnesium alloy via nanostructured hydroxyapatite thin films fabricated via radio-frequency magnetron sputtering.
J. Mech. Behav. Biomed. Mater. 46, 127–136 (2015). DOI: 10.1016/j.jmbbm.2015.02.025
Knotigova, P. T. et al.
Molecular adjuvants based on nonpyrogenic lipophilic derivatives of norAbuMDP /gmdp formulated in nanoliposomes: Stimulation of innate and adaptive immunity.
Pharm. Res. 32, 1186–1199 (2015). DOI: 10.1007/s11095-014-1516-y
Liu, P. et al.
Interaction studies between indomethacin nanocrystals and PEO/PPO copolymer stabilizers.
Pharm. Res. 32, 628–639 (2015). DOI: 10.1007/s11095-014-1491-3
Wakaskar, R. R. et al.
Peripherally cross-linking the shell of core-shell polymer micelles decreases premature release of physically loaded combretastatin A4 in whole blood and increases its mean residence time and subsequent potency against primary murine breast tumors after IV administration. Pharm.
Res. 32, 1028–1044 (2015). DOI: 10.1007/s11095-014-1515-z
Rana, M. S., Pota, H. R. & Petersen, I. R.
Performance of sinusoidal scanning with MPC in AFM imaging. IEEE/ASME Trans.
Mechatronics 20, 73–83 (2015). DOI: 10.1109/TMECH.2013.2295112

Rana, M. S., Pota, H. R. & Petersen, I. R.
Nonlinearity Effects Reduction of an AFM Piezoelectric Tube Scanner Using MIMO MPC. IEEE/ASME Trans.
Mechatronics 1–12 (2014). DOI:10.1109/TMECH.2014.2356454

Lin, W.-I., Shao, F., Stephanidis, B., & Zenobi, R.
Tip-enhanced Raman spectroscopic imaging shows segregation within binary self-assembled thiol monolayers at ambient conditions.
Analytical and Bioanalytical Chemistry, 8197–8204. DOI: 10.1007/s00216-015-8840-x
Das, S. K., Pota, H. R. & Petersen, I. R.
Multivariable Negative-Imaginary Controller Design for Damping and Cross Coupling Reduction of Nanopositioners: A Reference Model Matching Approach. IEEE/ASME Trans.
Mechatronics 20, 3123–3134 (2015). DOI: 10.1109/TMECH.2015.2411995
Maurya, M. R., Chaudhary, N., Avecilla, F. & Correia, I.
Mimicking peroxidase activity by a polymer-supported oxidovanadium(IV) Schiff base complex derived from salicylaldehyde and 1,3-diamino-2-hydroxypropane.
J. Inorg. Biochem. 147, 181–192 (2015). DOI: 10.1016/j.jinorgbio.2015.01.012

Klochko, N. P. et al.
Structure and optical properties of sequentially electrodeposited ZnO/Se bases for ETA solar cells.
Sol. Energy 120, 330–336 (2015). DOI: 10.1016/j.solener.2015.07.038


Susmitha, K., Naresh Kumar, M., Rajkumar, G., Giribabu, L. & Raghavender, M.
Enhanced dye sensitized solar cell performance with high surface area thin ZnO film and PEDOT:PSS.
Sol. Energy 118, 126–133 (2015). DOI: 10.1016/j.solener.2015.03.054

Chiao-Chen Chen, Chia-Jung Kuo, Chun-Da Liao et al.
Growth of Large-Area Graphene Single Crystals in Confined Reaction Space with Diffusion-Driven Chemical Vapor Deposition
Chem. Mater. 2015, 27, 6249−6258
DOI: 10.1021/acs.chemmater.5b01430
An, L. et al.
Optimization of TiAlN/TiAlON/Si3N4 solar absorber coatings.
Sol. Energy 118, 410–418 (2015). DOI: 10.1016/j.solener.2015.05.042
Potlog, T., Dumitriu, P., Dobromir, M., Manole, A. & Luca, D.
Nb-doped TiO2 thin films for photovoltaic applications.
Mater. Des. 85, 558–563 (2015). DOI: 10.1016/j.matdes.2015.07.034
Klochko, N. P. et al.
Zinc oxide-nickel cermet selective coatings obtained by sequential electrodeposition.
Sol. Energy 117, 1–9 (2015). DOI: 10.1016/j.solener.2015.03.047
Raza, M. R., Sulong, A. B., Muhamad, N., Akhtar, M. N. & Rajabi, J.
Effects of binder system and processing parameters on formability of porous Ti/HA composite through powder injection molding.
Mater. Des. 87, 386–392 (2015). DOI: 10.1016/j.matdes.2015.08.031


Learn more


Learn more


Learn more